Custom Wood Double Entry Doors with Glass | Jusen Factory Direct

12 min read

The first time a contractor opens a quote from a trading company, they usually do not look at the price first. They look at the lead time. Then they look at the spec sheet. Then they do the math on whether the sample they saw in a showroom will survive a 12,000-kilometer ocean voyage without warping or leaking.

We have been on the other side of that conversation for over a decade. Our factory in China builds wood double entry doors with glass for buyers who need consistency — not just a pretty door, but a unit that passes inspection, clears customs, and installs without surprises.

This article walks through how we supply those doors, what we can customize, and what to expect when you work with a factory directly instead of a middleman.

—

Why Choose Factory-Direct Wood Double Entry Doors with Glass?

The supply chain for architectural wood doors has an unnecessary layer. A trading company takes your order, marks up the price, and forwards the spec to a factory they do not control. If the production line is busy, you wait. If the finish quality is off, you argue with a salesperson who has never walked the shop floor.

We are the factory. That changes the conversation in three specific ways.

Cost transparency. Our pricing reflects raw materials, labor, and overhead — nothing else. When we quote a wood double entry door with glass, there is no hidden commission baked into the unit price. For buyers managing tight project budgets, the difference is often 15–25 percent compared to going through an export trading office.

Production control. Because we own the line, we control the critical seal between the wood frame and the glass pane. That joint is where most entry door failures begin. Water seeps in, the sealant degrades, and the wood swells. Our assembly process uses a two-stage sealant application — a structural silicone bead followed by a weather-resistant secondary seal — before the unit moves to the curing room.

Pre-shipment verification. Every batch of wood double entry doors with glass goes through our testing protocols before it is loaded into a container. We test for air-tightness using a pressure differential method, water-tightness under simulated rain at wind speeds up to 60 km/h, and wind resistance up to the local grading standard of your destination market. [1] We do not ship a door we have not tested.

Eliminating the Middleman for Better Pricing

A buyer in Texas once asked us why our FOB price for a double door with Low-E glass was lower than what he was paying his local distributor for the same spec. The answer was simple. The distributor was buying from an agent who was buying from a factory. We cut out two layers of markup.

Our pricing model works best for buyers who order in containers — either full container load (FCL) or less than container load (LCL). We can quote per unit or per set, depending on how you structure your procurement. For project-based purchasing, we recommend requesting a quote with your rough opening dimensions and glass performance requirements so our team can adjust the profile structure accordingly.

Strict Pre-Shipment Inspection and Testing

The test that matters most for entry doors is water-tightness. A door can look perfect and still fail within six months if the drainage channels are not machined correctly. Our wood double entry doors with glass feature a hidden drainage system in the threshold and frame — water that penetrates the outer seal is channeled out through weep holes rather than pooling inside the joint.

Each unit is inspected at three points: after the wood is milled, after the glass is installed, and after final hardware adjustment. We photograph the final inspection and include the images in your packing list documentation. If a unit fails any test, it is pulled from the batch and reworked — never shipped.

—

Our Range of Wood Double Entry Doors with Glass

Not every project needs the same door. A villa in Florida has different humidity requirements than a commercial lobby in Toronto. We build our wood double entry doors with glass across several configurations to cover those variables.

Custom Sizes and Glass Options for Any Project

Size is the first variable. We manufacture doors from 1200mm to 2400mm in width for double-leaf configurations, with heights up to 3200mm. Sidelights and transoms can be added to create a full entryway system.

Glass is the second variable. Our standard options include:

• Clear tempered glass (6mm to 12mm)
• Frosted or obscure glass for privacy
• Low-E insulated glass with argon fill for thermal efficiency
• Laminated glass for security and sound reduction

We do not stock generic glass. Each pane is cut to the exact dimension of your door opening, and the insulated units are assembled in our cleanroom to prevent dust contamination between panes.

Adjustable Profiles to Meet Local Building Codes

Building codes vary significantly across regions. European markets often require higher thermal performance (U-values below 1.0 W/m²K), while North American projects may prioritize hurricane impact resistance. [2]

Our profile structure is adjustable at the engineering stage. We can increase the depth of the door frame to accommodate thicker glass units, add a thermal break in the aluminum threshold, or reinforce the stile and rail construction for wind-load requirements. This is not a one-size-fits-all product line — our team reviews the building codes of your target market before we finalize the manufacturing drawings.

Hardware and Accessory Customization

The hardware on a wood double entry door with glass is not decorative. It is functional. We offer:

• Multi-point locking systems (up to 7 points) for security
• Stainless steel hinges rated for heavy door weights
• Pneumatic or hydraulic door closers
• Smart locks with keypad or biometric access
• Custom handles in brass, stainless steel, or matte black

We can match your brand’s hardware specifications or recommend a configuration based on the door size and frequency of use. For commercial projects, we typically suggest a multi-point lock with a panic bar option for emergency egress.

—

Flexible Partnership Models: OEM, ODM, and Bulk Supply

Buyers approach us with different levels of specification. Some have complete drawings. Some have a photo of a door they like. Some have nothing but a rough opening size and a budget.

We support all three scenarios.

Private Label and OEM Manufacturing

If you sell doors under your own brand, we are your manufacturing arm. We produce wood double entry doors with glass to your exact design — including your specified wood species, finish color, glass type, and hardware. The packaging can be customized with your logo and product codes. Your customers will see your brand, not ours.

We have shipped private label orders to Australia, Canada, the UAE, and across Europe. The process is straightforward: you send us your spec, we produce a pre-production sample for approval, and then we move to bulk manufacturing.

Engineering Support for Project Drawings

Our technical team reviews every project drawing before production begins. We check the rough opening dimensions, the floor-to-ceiling height, the threshold type, and the wall thickness. This review catches issues before they become expensive problems.

For example, a wood double entry door with glass that is specified for a 150mm wall may need a different jamb depth than one for a 200mm wall. If the jamb is too shallow, the door will not sit flush with the interior wall. Our engineers adjust the jamb depth during the drawing review, so the door installs correctly on site.

Consistent Quality for Construction Projects

Bulk supply for construction projects requires consistency. A development with 200 units needs doors that match each other in color, grain pattern, and dimension tolerances.

We control this through batch processing. All wood for a single order is sourced from the same timber lot and conditioned to the same moisture content (8–12 percent) before machining. This ensures that one door does not warp differently from another when exposed to the same environmental conditions.

—

Pricing, Lead Times, and Global Logistics

Price is not just the unit cost. It is the total cost of getting the door to your site without delays, damage, or customs issues.

FCL and LCL Shipping from Our Factory

We ship both FCL and LCL. For FCL orders, we load the container at our factory and seal it with a bolt seal that is recorded in the shipping documents. For LCL orders, we consolidate with other cargo at the port and ensure our crates are marked according to your instructions.

Our export packing for wood double entry doors with glass uses a suspended crate system — the door is held in place by foam blocks and corner protectors, not by pressure from the crate walls. This reduces the risk of frame distortion during transit.

Complete Customs and Export Documentation

Foreign trade documentation is a chore, but it is a chore we handle. Every order ships with:

• Packing list with container number and seal number
• Proforma invoice with HS code classification
• Bill of lading
• Certificate of origin (if required)
• Any additional documentation needed for your country’s customs clearance

We have shipped to over 40 countries. Our team knows the documentation requirements for most major destinations, and we will flag any missing paperwork before your shipment leaves the factory.

Efficient Production Scheduling

Because we control the factory floor, we can schedule production around your delivery deadline — not the other way around. Standard production time for wood double entry doors with glass is 25–35 days after sample approval, depending on order size and customization level. Rush orders can be accommodated for an additional fee, but we recommend against it for projects with strict quality requirements — finishing processes need time to cure properly.

—

Quality Control and After-Sales Support

A door is a long-term investment. We build ours to last, and we support them after they leave our factory.

Performance Testing for Weather Resistance

Our wood double entry doors with glass are tested for three performance criteria before shipment:

• Air-tightness — measured by the amount of air leakage through the closed door under a specified pressure difference. We achieve a Class 8 rating (the highest in the GB/T 7106 standard) for most configurations. [3]
• Water-tightness — measured by the ability to resist water penetration under wind-driven rain. Our doors achieve Class 6 for most configurations.
• Wind resistance — measured by the door’s ability to withstand wind pressure without permanent deformation. This is critical for high-rise applications.

These tests are not just for our benefit. They give you documentation to show your client that the doors meet the performance requirements of the building code.

Protective Finishes and Durability

Wood is a living material. It expands and contracts with changes in humidity. A good finish accommodates this movement while protecting the surface.

We apply a multi-coat finishing system: a primer sealer, two coats of topcoat, and a final UV-resistant clear coat. The finish is applied in a controlled environment with humidity levels at 50–60 percent, which prevents the wood from absorbing moisture during the coating process.

One honest caveat: wood double entry doors with glass are not the best choice for every climate. In extremely high-humidity coastal areas, an aluminum-clad door may offer lower maintenance. If your project is within 800 meters of saltwater, we will tell you that before you place an order — not after.

Installation and After-Sales Assistance

Our after-sales support covers installation questions, hardware adjustments, and replacement parts. If a lock mechanism fails or a hinge needs re-tightening, we will ship the replacement part and provide video instructions for the installation.

For large projects, we can provide on-site installation supervision at your cost. This is optional, but we recommend it for complex entryway systems with sidelights and transoms, where alignment tolerances are tight.

—

Case Studies and Project Applications

Custom Villa Entrances

Most of our custom villa orders are for private residences where the entrance door is the focal point of the facade. We have worked on projects where the client wanted a specific wood grain pattern that matched the interior trim, and we matched it by selecting timber from the same log.

For villa projects, we typically recommend a double-leaf design with a fixed transom above. This configuration allows natural light into the foyer while maintaining the visual impact of a grand entrance. A wood double entry door with glass in a custom villa is not just a door — it is a statement.

Commercial and Hospitality Applications

Boutique hotels and office lobbies use our doors to create a first impression. In these applications, the door is often the most used element of the building envelope. We recommend commercial-grade hardware — multi-point locks, heavy-duty hinges, and automatic door bottoms for soundproofing.

For commercial projects, we can also provide fire-rated options up to 90 minutes, depending on the wood species and construction method. Fire-rated doors are not simply about thicker slabs. The frame, seal, and hardware matter just as much. We will work with you to ensure the entire system meets the required fire standard.

—

Frequently Asked Questions

Can we customize the size of the wood double entry doors with glass?

Yes. We offer full customization on size. Send us your rough opening dimensions, and our engineering team will adjust the profile structure accordingly. We manufacture double-leaf doors from 1200mm to 2400mm in width, with heights up to 3200mm.

What type of glass do you recommend for energy efficiency?

We recommend Low-E insulated glass with argon fill for most markets. The Low-E coating reflects heat back to its source, keeping interiors cooler in summer and warmer in winter. However, we can adjust the glass configuration based on the specific climate and building codes of your target region. For tropical climates, a double-glazed unit with a solar control coating may be more appropriate.

How do you ensure the doors are not damaged during shipping?

We use a suspended crate system with foam blocks and corner protectors. The door is secured at the stiles and rails, not at the glass panels. Our pre-shipment inspection includes checking for any signs of damage before the crate is sealed. We have shipped thousands of doors internationally with a damage rate under 0.5 percent.

Do you provide OEM services if we want to sell these doors under our own brand?

Absolutely. We support OEM and private label services. We can adjust the hardware, finish, and packaging to meet your brand requirements. We can also print your logo on the door hardware and include branded manuals in the crate.

What documents do you provide for customs clearance?

We provide a packing list, proforma invoice, bill of lading, and full customs documentation required for international shipping. This includes the HS code classification for wood doors with glass (4418.20 or 4418.21, depending on the wood species). We will ensure the documentation matches the shipment exactly to avoid delays at customs.

What is the minimum order quantity?

Our MOQ is 10 sets for standard configurations and 5 sets for fully custom designs. For LCL shipments, we recommend ordering at least 10 sets to make the freight cost per unit reasonable.

How long does production take?

Standard production time is 25–35 days after sample approval. This includes timber conditioning, milling, assembly, finishing, and testing. Rush orders can be completed in 20 days, but we recommend against it for projects with strict quality requirements.

—

Decision Guide

Choose our factory-direct wood double entry doors with glass if:

• You need consistent quality across a large project (over 20 sets)
• You want to avoid the markup from trading companies
• You require custom sizes, glass configurations, or hardware
• You need OEM or private label manufacturing
• You value pre-shipment testing for weather resistance

Consider an alternative if:

• Your project is within 800 meters of saltwater — an aluminum-clad door may be more durable
• You need fire-rated doors with a specific certification we cannot provide for your region
• Your timeline is under 20 days from order to delivery

—

We are not the right supplier for every project. But if you need wood double entry doors with glass that are built to last, tested before shipping, and priced without middleman markup, we should talk.

Send us your project drawings or rough opening dimensions. Our engineering team will review them and send you a detailed quote within 48 hours.

Get a Free Quote

—

References

[1] ASTM International, “Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference,” ASTM E547-00. https://www.astm.org/e0547-00r16.html

[2] International Code Council, “International Building Code (IBC) – Chapter 14: Exterior Walls,” 2021 Edition. https://codes.iccsafe.org/content/IBC2021P1/chapter-14-exterior-walls

[3] Standardization Administration of China, “GB/T 7106-2019: Graduation of air permeability, watertightness and wind load resistance performance for building external windows and doors.” https://www.chinesestandard.net/PDF/English.aspx/GBT7106-2019